Question about Suzuki Motorcycles
adjust the clutch lever to engage sooner on 04 Suzuki intruder 1500 Step 1 Pull back the rubber cover of the clutch lever to reveal the lock nut and adjusting screw. Loosen the lock nut with a wrench.
adjust the clutch. With the clutch cable as loose as you can get it. Turn the adjuster screw counter clockwise as far as it will go. Then turn it back clockwise 1/4 turn. Now, align the adjuster screw
...clutch release mechanism. Adjust the cable at the midway adjuster, holding the cable tight away from the lever. Adjust until there is 1/16" to 1/8" free play between clutch lever mount and the end of ...
Question about Keeway JL 12511 Motorcycles
...adjust clutch lever "free play". There is an adjusting knurled nut or adjusting nut (looks like a small sprocket) at the clutch lever... turning it clockwise will decrease the tension.. you probably ...
...adjust the clutch. Mine doesn't completely disengage when I shift gears. Too much play in the clutch handle. You need to adjust the clutch cable adjustment for the clutch handle, THEN adjust the ...
...derby cover. Go back to the cable adjuster and adjust the adjuster outwards until you have about 1/8" freeplay at the clutch lever. Tighthen the lock nut and replace the bellows cover. Good Luck ...
...off adjusting screw.Tighten screw until it JUST touches.Back off 1/4 turn.Hold in place while tightening lock nut.Adjust clutch cable adjuster until there's 1/16-1/8" free play at hand
......
...adjust the clutch. With the engine off, put the transmission in first gear. Pull the clutch in and hold it. Try to start the engine. If the bike pulls forward, you need to adjust the clutch. Find the ...
5 questions posted
Usually answered in minutes!
2 Questions
1 Questions
2 Questions