...remove tank from 2010 softail FLSTC How do I remove dash and tank for routing of additional cables along frame underneath? Drain the gast tank. Remove the chrome bolt holding the dash to the tank. ...
...tank remove seat, remove console on top of tank, disconnect wiring from console to tank, disconnect vent line if present, disconnect fuel line on tank, disconnect fuel gauge (up under tank on left ...
Question about Piaggio MachG LC Motorcycles
...remove the tank to access the spark plugs You need to remove the gas tank to access the plugs. *Remove the rear seat *Remove the front seat *Remove the single bolt holding the tank on *Remove the 3 ...
Question about Piaggio MachG LC Motorcycles
...tank. Remove front seat. Use your key. Remove rubber caps from the fuel shut off valves. Run screws in all the way to shut fuel off. Remove speedo dash ? 3 qty # 5mm Allen. Unplug all connectors ...
tank until empty. Remove the console over the speedometer assembly.Remove the bolts connecting the tank to the frame. Remove the screw in front of the seat, at the back of the Harley-Davidson gas tank
...tank Remove the single screw or nut that holds the speedometer cas to the tank. carefully move the case forward and release from the front or the tand. disconnect the two or three plugs and the ...
Question about Piaggio MachG LC Motorcycles
...tank how do you remove a harley davidson ultra classic gas tank (09) Drain the fuel either by siphening or removing the cross over tube at the front of the tank and letting it drain that way or just ...
Question about Piaggio MachG LC Motorcycles
...tank first. Remove the side covers and the seat. Remove the rubber covers from the front tank mount at front of tank (right side). Remove the two screws at the front of the tank and the rear screw ...
Question about Piaggio MachG LC Motorcycles
...remove the tank. The tank is not difficult to remove. I think the tank has three bolts and you'll probably have to remove the battery tray on the other side. Disconnect the hoses and remove the tank. ...
...tank remove 2009 softail gas tank to install 8" t-bars for internal wiring, using all the stock controls. I haven't worked on an '09 model but all the Softails I ever worked on had two tanks. To ...
15 questions posted
Usually answered in minutes!
5 Questions
4 Questions
0 Questions
2 Questions
1 Questions