...very simple and if the source of the noise is in the unit, I would look to a problem involving the Phantom power supply. The Phantom connects to the mic inputs and if it gets noisy it will often ...
...mixer and get a good sound with the microphone you are using. If it is a microphone that requires phantom power make sure you turn the power to the mixing board on first, then the phantom power. Do ...
...be greatly appreciated. This may sound really stupid on my part, but if the auxillary out requires phantom power did the phantom power switch get changed possibly? Did this ever get solved?... I
...look at the mbox mini control panel, it says that it is not connected as well. Also, if i click the phantom in the back the red light on the front just blank frequently. Assuming you are on a Windows ...
Question about Behringer Music
...the pan dial to 12 oclock also. remember if you are using mic input 1 or 2 with a mic that requires Phantom power the button needs to be locked in the down position. OK im assuming you have checked ...
...from left end as +16, grd,-16 and then several others including one at about 9.5 volts and then the phantom power at around +48 volts... You may find the -16 or +16 pulled to the opposite polarity if ...
Behringer XENYX 1620FX, won't power on. Phantom power works(?) Here is a schematic close to your unit: http://elektrotanya.com/behringer_xenyx_1622fx.pdf/download.html Scroll down to "get manual" ...
...manual" and click on it to download. Ignore other download links on the page. Try turning off the Phantom power if it might be on... If that stops the hum, something is the matter with the bypasses ...
3 questions posted
Usually answered in minutes!
1 Questions
1 Questions