Peavey Electronics Peavey PV14 Mixer "powered powers sound output" Questions

Ad

Question about Phonic Music

1 Answer

...powered mixer and you are plugging speakers into the speaker output connectors and still getting little or no sound, check your speaker cables and the speakers themselves by plugging them into known ...

Ad

...powered amp - the power light is on but no sound is coming out? I have checked all channels and buttons and replaced both fuses - the one in the back and the one in the plug- still no sound but it is ...

Ad

Behringer pmp3000 board powers up sound on A output no sound on output B Output B amplifier has a problem. Most likely the output transistor.

...sound altogether. Powers up, but no sound. Thought maybe a transistor blew based on post on youtube where in which the amp, solid state, also had power but no sound. Would like to know if you think ...

...powered mixer. It powers up normally but doesn't have any sound at the speaker output. What can I check for? Thx Andre. Assuming you have tried other cables and speakers to be sure it's the mixer, I ...

...sound better with a shure sm57 microphone hooked up to a mixing board or other instrument amp. the record output should be PERFECTLY balanced to hook up to a consumer-level stereo reciever with NO ...

of course), touch the + and - speaker connections to a 9V battery. If you don't hear a pop sound then your speaker is blown. Thus, no output sound. If speaker is OK, then the output IC is your problem

Question about Behringer Music

1 Answer

...sound on the output. All lights are running, I use condenser mic and it works through minimic 800 phantom power but nothing happens on the meter when I speak and there is no sound. Although, I see ...

Question about Mackie Music

1 Answer

...sound in head set but not though spaeker This is not a powered mixer and so you must connect a power amp to the "line level" outputs of the mixer. Other "no output" problems could be related to buss ...

...or using damaged speakers can draastically change perceived sound levels. Checking the output waveform amplitude and voltage under load is with an oscilloscope the only way to diagnose this

Not finding what you are looking for?
Peavey Electronics Peavey PV14 Mixer Logo

11 questions posted

Ask a Question

Usually answered in minutes!

Top Peavey Music Experts

Brad Brown

Level 3 Expert

19187 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Ngoro

Level 3 Expert

3521 Answers

Are you a Peavey Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...