...floor monitors to mixer and amp I have a PV14 non powered mixer, a pyle pro 4100 amp and two non powered floor monitors. How do I connect the monitors to the mixer and amp? No knowledge of this stuff ...
floor monitors. Thanks, DO NOT connect your in-ear monitors to the power amp out using the MAIN/Mon speaker option as it would be goodbye hearing and fried ear buds.. Get a very small and in-expensive
...floor monitor to mixer You need to connect the speakers using an XLR cable into the Main output jack on the back of the mixer. If they are powered speakers you will need to connect them into a power ...
I'm new to the oh thing. I bought a Peavey XR684F powered mixer. There are 4 output jacks on the back for speakers. Which ones do I use? I have 2 Behringer B215XL speakers. I also want to use a floor ...
I purchased a PV12M monitor and was wanting help connecting it to my Behringer xenyx 2442fx mixer You will have to have an amplifeir between them since the PV12M is an unpowered speaker. The Xenyx ...
...connecting a separate external speaker (floor monitor, pa cabinet) for a "low volume" test.The OM says the internal speakers are 4 ohm so it's unlikely that a wiring problem with speaker ...
...floor on the connections do you connect the speckon cables to each A and B port on the back of the PMP 6000 power mixeran to each main speaker and if so where do the 1/4 TS connectors from the mons. ...
I have the Phonic powerpod 820. I ordered a Kuston powered floor monitor to add too the system. I know not to hook it up too the speaker outputs on the back of the mixer. So where do I hook up the ...
Phonic S715 "15" 2way Phonic S715 "15" 2way stage/floor monitor speaker isn't putting out sound for some reason when it started was during a house show it was working fine and as another
11 questions posted
Usually answered in minutes!
85 Questions
60 Questions
39 Questions
19 Questions