Peavey Electronics Peavey PV14 Mixer "amp connect power" Questions

...amp. can i connect a 10channel samson 900watt power mixer amp to a gli pro xa5500 3500watt amp and use it with various speakers. You have two aux sends on that mixer so quite easy to use one of those ...

...connect an external power amp to the main out jacks, the signal is sent directly to the power amp and is not routed through the internal power amps of the mixer. The external power amp then amplifies ...

...amp. Unplug the cord. Connect PLV1-PLV2-PLV3 (this are Bias voltage,+/-15VDC and Backlight PCB voltage) to power trafo.Power ON the amp. If fuse is not blowing,PLV circuit is good.If fuse ...

...power amp for both these outputs is blown, is there an easy fix of am I looking at replacing the power amp board HCA2500, and if so where can I get one? Hi, I think in most amps switching to bridge ...

...connect to the left and right Power Amp Inputs. That doesn't make sense to me, since the SX2442FX is not technically a Power Amp. Am I right, or is my friend right? Thanks. Either way will work, ...

...need toput power amplifiers that drive the speakers and then connect the board to the power amps. Use BALANCED interconnects for this and power the board from the same receptacle or surce as the

How do I connect the monitors to the mixer and amp? No knowledge of this stuff at all so please be specific as to inputs and outputs as well as right/left and A or B. Thank you. why are you doing this

amp and the cord to connect the guitar to the amp. When I plug in the amp, there is nothing unusual. But when the guitar is plugged in, a loud buzzing sound emits. I have replaced the amp and that has

...connect a distortion pedal the power amp jacks at rear tried affects loop in front bid drop in power-do you connect same way as effects loop with send /return Pedals operate at a different level then ...

...the power supply from the amps and see if the unit keeps running. If it does than re-connect one amp at the time and see what happens. This should get you a fair way in to finding the fault. Have