Behringer Eurorack Ub802 - Ultra Low-Noise Design 8-Input 2-Bus Mixer "mixer hiss" Questions

HISS from Numark DM1200 mixer. Not present in speakers (self powered) when mixer off. Using XLR cables with telescoping ground lifts on each line. Monster 3500 power filter. Ideas? All interconnected ...

...hiss is still there without the Mic then sounds like the mixer is faulty - try some of the other channels..... How loau is the hiss - just in the background or as load as a vocal "one, two" test? A ...

...mixer using a balanced to 1/8 inch balanced connector you will get plenty of hiss since you are driving the stereo channels oppositely. For high quality, get a good audio interface that runs on the ...

when using the dsp of the mixer after an hour or more of use the is a hissing and scratching and crackleing sound what could be the cause iof this?...the mixer is brand new and only has been used 3-4 ...

...mixer, it's brand-new, and for some reason there's a weird buzzing/hissing sound in the main mix that will just not go away no matter what I do. I've unplugged everything, including the mic and it's ...

How do I fix my mixer 32fx out put My mixer output sound goes off after 15minutes and come back after I restart it .and sometimes hissing sound comes through the output how do I fix it If the mixer ...

My Behringer mixer Eurorack UB802 doesn't work anymore with condenser microphone like Behringer B-1 ,instead it produces a hissing and pop sound please help me to solve my problems. Here's the

hiss as soon as i turned on the device to do a recording, found a high level of hiss. If trim controls or gains are set near maximum, HISS is normal as electronics generates a thermal type noise. If ...

hiss... What is going on??? What is the source of the input signals? These need to be balanced lines and the sources need to be balanced. If you happen to be using condenser mics, you probably haven't

mixer works perfect for about an hour, then a hiss starts, eventually getting louder, till sound then gets intermittent. I turn off. Feels hot on side of mixer. What to do next? I am guessing that the