...water. I can't find the instructions and it does not say anything on the sprayer. Thanks for your help. it should tell you on the induvidual bottles/cans of weed/grass what proportions of ...
...water in the sprayer leaving some air on top to build pressure. Put a few drops of dish soap inside and gently stir. Put the cover on, and tilt the sprayer to coat all areas at the top. Start pumping ...
...sprayer Sounds like a faulty seal to me. Submerge the container in water and pump, bubbles will rise from the seal. Easy to fix, I had a look and you can pick up a seal replacement kit for this model ...
...water and gently sponge it all around the cover of the sprayer. Pump it up and note where the bubbles form--this is where your leak is. If you are not able to return it, check to see if there is a ...
motor runs but does not take in water If the polarity of the voltage (+ and - ) are reversed, the pump will run in reverse and it will not pull water. Reverse the leads.
amount of mixture - oz.of concentrate to oz. of water 6 oz per gallon of water for weeds and lawns
water leaks out of the bottom Hello, If you see water leaking it might be that the plastic has a broken, try to seal it with super crazy glue. Thanks
...the weed killer? Hello, Yes I do use it, you can put about 1qt of round up for every gallon of water. This should kill your weeds, for most precise mixing instructions check the bottle label. ...
...water several times. If the end of the sprayer is metal, you might gently probe down with a needle, but open the sprayer tip to the widest spray setting, and be careful not to damage the spray tip or ...
water . It is a 25 gallon sprayer Sounds to me like it just needs priming (or in other words) the air bled out of it. Using the force of gravity, force water to run STRAIGHT DOWN from the 25 gal tank,
29 questions posted
Usually answered in minutes!
201 Questions
7 Questions
4 Questions
3 Questions
1 Questions
