...output can drive the speaker cone such that it goes beyond the linear range that the speaker and amplifier can handle and this appears as "noise". The noise may sound like a buzz or totally break up. ...
low level devices and to the middle setting for mid level and use the -40 Db for high output devices. The two 1/4 inch jacks are in parallel so you can for instance run an instrument into one and back
...low output from your guitar it is possible that you don't have enough output to get the distortion in the amp to work. Other settings in the guitar add harmonics by mixing more than one pickup. ...
...Low quality cables can cause or let in noise and hiss. Check that ALL, and I mean ALL interconnected equipment is powered from the SAME receptacle or power conditioner. Check that you are not using a ...
...low level amplifiers or the high power "final" output amp! To prove this, you will need the help of an electronics technician who has access to a variable audio signal generator (amplitude and ...
have a low noise like hum when i turn on thump 15A It doesn t change by moving level but when I plug in anything it s feeding a noisy tale on every signal attack. Make sure you are using BALANCED ...
...output should the amp hard over. It is strange that you could draw smoke with the setup. Hopefully you were not generating very low frequencies that were below what the speaker could handle OR that ...
...output is very weak. Music comes out great. I have to set the levels all the way up to get any mic sound and usually there is a lot of clipping. You need to almost scream to get any sound with a mic. ...
...low volume. If you need to run it harder so that it gets into the distortion range then a attenuator will drop the volume down to a practice at home non eviction volume ;-] There can be more than one ...
9 questions posted
Usually answered in minutes!
37 Questions
5 Questions
4 Questions
5 Questions
