Question about Behringer Music
...noise on the mixer from the USB input, and I can reduce it if I turn the COMP or High/MID EQs down or keep it at a very low gain, but I don't think that's fixing the issue. Please help! Hi, ...
would be expected via the little microphones either. Most of the hiss or noise is above a certain frequency and if you run it through an EQ you can prune off some of it by reducing high frequency gain
...hiss or noise problem is due to damaged or incorrect cables been used. Check your cables. Check your gear. If the inputs are TRS (1/4") the make sure your cables are to. This goes for any connection ...
...noise(hiss). some effects are noisier than others but overall noise level is unacceptable. all the product reviews say how quiet this unit is. tried changing signal path, levels, changing universal ...
hiss" type noise, that is different. That is USUALLY caused by the user failing to set the gains and levels properly. Some electronic noise is from the statistical background noise likited by the laws
...HISS is normal as electronics generates a thermal type noise. If gains are set in normal operating area, the noise SHOULD be minimal. Other sources of interference like nearby radio transmitters, ...
hiss on my recordings, i have isolated the problem to the finalizer, is this a psu problem? A common problem with signal-to-noise ratio is having too much gain in the FINAL stages of an audio path, be
hiss... What is going on??? What is the source of the input signals? These need to be balanced lines and the sources need to be balanced. If you happen to be using condenser mics, you probably haven't
9 questions posted
Usually answered in minutes!
37 Questions
5 Questions
4 Questions
5 Questions