Sub-Zero 690 Side by Side Refrigerator "model 532 door" Questions

...model #532 ser#m1037262 Hi, On this model I will give you both gasket numbers as you didn't specify which one you needed. Freezer door part number 7010574, Refer Door 7010584. I verified that these ...

...532. Model I have is side-by-side, stainless, doors are about 70 inches. 115 volts on a 15 amp circuit as with all fridges they should be on a 115vac circuit capable of 20 amps only at compressor ...

...out onto the floor, indicating that the coils were never frozen over. Model number listed below is WRONG. Our model number is 532. The unit is about 20 years old. replace the gasket around the ...

...model 532 fridge not cooling well, freezer ok I just moved into a house with a system 532 side by side model. I don't have any manuals or info on when it was made, etc. The freezer is cool and is ...

...model 532 where the fridge lights will not come on. I replaced the bulbs alll 4 are new. The freezer lghts still work. The ref. door switch may be at fault. Flip the switch several times and see if ...

...stainless stell to match the appliances. All of the metal companies say the appliance manufaturers have a propriety type of lock on the appliance metal finishes. I also have the 532 model. Good ...

...model 532 I need to replace my 532 and need to know the exact dimensions of the unit so it will fit into the cabinet space he old one occupied. FINISHED ROUGH OPENING DIMENSIONS: WIDTH = 47 1/2" ...

...Model 532 (1994) Refigerator/Freezer: SubZero Model 532: Built 1994 Top of refrigerator just inside the fridge door has condensate collecting and eventually dripping onto the floor. I ''inherited'' ...

...Model was 532 manufactured in 1994...Comment posted on May 07, 2009 Oh, yeah. Did I mention it's a SubZero (model # 532)?Comment posted on May 07, 2009 P.S. Door does not close all the way by itself. ...

...532 model, date on it is May 1996. transfer door not opening..could be the unit itself, or sensor or thermostat controll..look for any ice or dirt buildup at transfer unit..a reputable repairman ...