Comfort Zone CZ1500WC Infra-Red Utility/Portable Heater "heater code 3" Questions

Ad

...code is 3 flashes. Gas supply should be good, heater in another room ups mhu75ng stopped lighting after about a year. Fan starts, but burner doesn't light. Fan stops after about a minute. LED ...

Ad

Question about Rinnai Heating & Cooling

1 Answer

heater will stop and the red Reset lamp will light rather than the EE2 code. (Note: There may be other reasons for the reset lamp to come on but much of this information will apply.) What Can Cause An

Ad

...code for a goodman gas heater when it blinks 3 times. The error code refers to a defective combustion air switch. Coleman Evcons made around 2007 had defective pressure switches or as they call them ...

Question about Marley Heating & Cooling

4 Answers

...heater i am installing hot water baseboard heaters and need to know how far off the floor these should be installed IF THEY COME WITH THE COVERS SET THEM AGAINST THE WALL WHERE TO BE INSTALLED, THERE ...

Question about Mr. Heater Heating & Cooling

1 Answer

code with no call for heat ? Please Help Make sure you are using the R and W terminals both at the heater as well as at the thermostat. Try jumping the wires together without the thermostat and see if

Question about Goodman Heating & Cooling

3 Answers

code blinks 3 times 3 blinks is the pressure switch not working , could need replacing This should help you, see this video: Amazon Furnace Parts: http://www.amazon.com/s/?_encoding=UTF8&camp=1789

Question about Mr. Heater Heating & Cooling

1 Answer

...code. the heater is brand new, only worked for 3 days. i have bypassed the 2 switches but still cant clear the 4 flash blink code. According to the Owners/Installation Manual, the 4 flash blink code ...

...3 times. ANy ideas The led is flashing your fault code. You can look the code up by looking on the inside of your indoor blower panel. Please let me know what the trouble code is. I am guessing you ...

Question about Goodman Heating & Cooling

1 Answer

Goodman GMP050-3 I am getting 3 blinks is it the pre fan assy or the sensor the directions for reading the code is usually located on furnace door. i think three is flame sensor.

Question about Goodman Heating & Cooling

1 Answer

...a while then turns off. Nothing else works. Saw a fault code of "3 blinks". 3 blinks is fault with the pressure switch not working try jumping it out some times you can fool it in to ...

Not finding what you are looking for?
Comfort Zone CZ1500WC Infra-Red Utility/Portable Heater Logo

204 questions posted

Ask a Question

Usually answered in minutes!

Top Comfort Zone Heating & Cooling Experts

Paul Carew

Level 3 Expert

3808 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Comfort Zone Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...