Gateway Desktop / Intel Core i3 Processor / 8GB Memory / 1TB Hard Drive (DX484011E) "cant 2 disc set" Questions

...2 devices set as slave or master on same ide cable and it cant detect the HD. Try temporarily disconnecting the CDroms or other devices that may be conflicting and see if that helps. Hope that helps. ...

...cant find disk to start windows This could mean one of 2 things. Your hard drive is damaged or your Windows installation is corrupt. Try reformatting it using the discs that came your computer. Just ...

...password, try this: 1. reset PC 2. Fast press F8 (safe mod) 3. Enter Safe mod option 4. Go on settings-profiles and delete all profiles (only admin u cant delete) 5. Reset PC and login without ...

cant get one of my playstation games to work on the internet but all my other ones do, and it says its because of the DMZ and NAT settings......how or wat do i do to change this? I'm guessing you mean

...cant really put the cables in wrong becasue they only fit a certain way. but be sure its plugged into the IDE 2 slot on the board and isnt connected on the same ribbon as the HDD. Now it may be a ...

...2 weeks after i bought it i had to reset it with the help of an HP technician over the phone as the keyboard would miss letters out . so i know it is not a very big job , but cant remember how to do ...

2:- Bios option - RAID, imaging fails if the RAID settings are active, you need to try a different raid setting and it will allow this to run, i cant remember what the raid setting i used was but have

...cant figure out whats wrong i only have a few burned movies to try and they started up fine the auto play opened and everything put the game back in and nothing. i put the american phsyco movie (its ...

cant understand properly; is dvd drive dislpaying in my computer ??? if not there is loose connection problem or if dvd writer is showing in coms setup (while starting pc u may press DEL key and go to

...cant garantee it, sorry! If your warranty is valid, demand a refund. keep it cool and use the old unplug and press the power button for 4 seconds. look into updating the bios or resetting the cmos My ...