Sony DVP-NS305 DVD Player "recorder tray keeps opening" Questions

tray manually. Must shut the recorder down and then press "eject" on the remote in order to open the tray. What do I do to remove the "safe" mode? I unplugged the recorder for 10 seconds, replugged it

magnavox ZC320MW8 door stays open While doing a recording, the dvd had enough time on it. Then the slide tray opens, I assume it wants another dvd to record on, put dvd in, it reads cannot record on ...

...TRAY THE WHOLE TIME. I NEED TO SAVE SOME FOOTAGE RECORDED ON THE HDD...... IS THERE ANY WAY OF GETTING AROUND THIS PROBLEM LG HDD/DVD RECORDER RH278 Hi, I have exactly the same thing. Happened before ...

...recorder - Disc tray keeps opening/closing for no good reason.Only way to stop is to pull out plug from wall and push back in by hand.Any ideas? my dvd player sony cinema entertainment system ...

tray is not opening. blocked message comes. There will be a slotted hole on the underside slide a screw driver across this will manually activate the tray dogleg and will part open the tray for you. i

...cannot open disc tray. please help Hi, Keep pushing the "STOP" button on the Remote-controller will open the tray. This works mostly on all Philips DVD's. I tried on my recorder, it works. Have

...recorder works most times, however is unreliable. The tray holding the disc sometimes pops out before a recording starts, therefore the set program is not recorded. Also, quite often the disc tray ...

...tray will not open at all. Hello, The reason your player keeps reading a disc and do not play is because the the disc tray is not sitting the disc properly on the lens. The disc tray is faulty, the ...

...while pressing down A on the recorder, and release the button when the disc tray opens. Then, keep [/1 on the recorder pressed for about ten seconds until "WELCOME" appears in the front panel ...

...Recorder Drawer keeps opening Drawer keeps opening and closing and won't read discs! Rassie from Cape Town South Africa Could be a timing issue with the tray mechanism - possible that somebody has ...