Sony KV-35S42 35" TV "vertical oscillator" Questions

Ad

...the set lose vertical synchronisation signals, or the vertical oscillator is oscillating out of frequency.  The work is a skilled one, and you must have through knoledge in electronics to

Ad

Question about Sharp Televison & Video

1 Answer

...or makes any sound. hi you have defective power oscillations! in this model you have to replace the vertical output ic. because the power oscillation for Jungle IC is passing by from Vertical output. ...

Ad

Question about Konka Televison & Video

1 Answer

vertical oscillator circuit. try to look if your tv has a vertical hold control at the back or inside, if it does not have, u have a problem in the vertical oscillator circuit. by the way, its not the

Question about Televison & Video

1 Answer

...vertical ic... plz help me clearly expert plz There is no horizontal oscillator IC. The horizontal oscillation is generated and outputted by the main system control IC LA76810 itself. Refer some ...

Question about RCA Televison & Video

1 Answer

troubleshooting Vertical is rolling If the vertical hold control have no effect, and can't stop vertical rolling, the vertical oscillator side should be checked. Check the hold control too, if any.

...oscillator jungle & 78040 is the vertical IC. Refer its schematic for more details. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. ...

...vertical oscillator jungle IC. Check the frequency to the input of the vertical scan IC, with a frequency meter. If there is frequency, and still no vertical scan output, check the yoke connection, ...

Question about Televison & Video

1 Answer

...and it goes to stanby.the LED blinks for few seconds then goes off. no line flyback transformer vertical line horizontal out put circuit horizontal line vertical output circuit at ...

Question about Zenith Televison & Video

1 Answer

...stops for a few seconds and then jumps again for a while, getting longer between normal picture times Vertical oscillator and output section should be trouble shooted.  It is a skilled

Question about Sanyo Televison & Video

1 Answer

Vertical lines when powered on There are two possibilities. 1. Deflection yoke mismatch. 2. Shorted component/s at its horizontal oscillator section circuit or at its main power supply regulator [SMPS

Not finding what you are looking for?
Sony KV-35S42 35" TV Logo

76 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...