Sony KV-35S42 35" TV "lost vertical deflection" Questions

...lost vertical deflection. High voltage is most likely fine since there is something on the screen. This could be due to: Dirty service switch contacts. There is often a small switch located inside on ...

...lost half the screen. only the bottom is showing Possible failure of the VERTICAL SECTION of the deflection circuit. It is possible that the areas related to the vertical circuit is checked , check ...

...lost vertical deflection. This can be often caused by: - bad connector contacts (oxydized pins) on the deflection coil connector at the picture tube neck or on the circuit board - in or around ...

flat line in center on tv You have lost the vertical deflection circuit. Replace the vertical output ic and all the capacitors in the vertical circuit.

...lost vertical defl I have a 15 year old Zenith console, SL2737RK model, that has lost vertical deflection. Is that a difficult repair? Worth fixing? We would like to keep the tv, and I am very handy, ...

power is on but screen will not turn on stand by button keeps flashing TURN UP THE SCREEN CONTROL, SEE IF YOU HAVE A VERTICAL LINE. IF YOU DO YOU LOST VERTICAL DEFLECTION

...lost your vertical deflection. Since a fuse was involved, that indicates that an overcurrent condition existed. You may have a blown vertical deflection IC, or there could be just a shorted diode, ...

vertical output on this set? I have ordered the SAMS photofact, just would like to order the parts also. It isn't a transistor, It will be an I.C. with a part number that probably starts with an LA_ _

...lost vertical deflection, and you don't want to run the set like that because you can burn that line into the picture tube. Most likely would be the vertical output ic, probably with a 400 location ...

...lost the vertical deflection. Thank you for your help...Ralph Watson You have a bad vertical output IC, or the sweep power supply that drives the IC is bad. Your going to need the service schematic ...