rectifier, possibly a high voltage coil called a flyback transformer, wire wound resistor, maybe a low resistance resistor, maybe a high voltage capacitor. In some tvs you need an EPROM ic. I hope you
...put it on at the switch then press the button on the tv and nothing happenes has the fuse gone in the tv or in the plug plz help This could be a problem with the power supply. Yes there is a fuse on ...
...heat sink, put 1.8K resistor across. Remove L534. Put light bulb across C651, put mains onto middle two pins of Bridge rectifier (D613) if power supply is good lamp will run forever. Hope this
No picture displaying but sound coming through ok TV has been working fine gone to put it on and their is no picture displaying but sound is coming through fine. It s working couple of hours prior to ...
put only this rated fuse. If it is 110 or 120VAC, the fuse rating may differ; and will go upto 6 to7 Amps. More than this rated fuse should not be used. You just do one thing. Just open the back cover
...put a book or magazine under one corner to torque the chassis enough to get it to work reliably. If these two procedures do nothing then: The Sony blinking code gives key diagnostic indicators, but ...
after the tv powered off and keeps powering off and won't power on. I did the test by holding the input and menu putting and got a code 22. Please don't tell me i screwed it up by switch the satellite
...transistor after the tv will come on ----if they will be light on the tube then test a tuner, by putting in
77 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions