Sony KV-36XBR450 36" TV "direct loosing sound" Questions

...at its video output stage circuit board.  This board can be located at the neck of the CRT, directly plugged on to

...Sound Failure Cable hookup - direct from Time Warner. No boxes in the path. The TV works normally for a while - 5 minutes or several hours, then the sound goes buzzy loud and the picture goes to ...

Tv has gone all red It sounds that the video ouput card has either damaged component/s or a loose solder point to its re output section. One color predominant screen. Resolder all the suspected solder

...it and I'm at a loss as to why this is happening. I've tried going through a DVD player instead of directly through the TV and the results are the same. Please help You must have broken something ...

...Direct TV. The On/Off button would not turn the TV on, only the Remote can turn it On and Off. Any ideas on what could be the problem, or should I just get rid of this boat anchor? Would appreciate ...

...as I live overseas and the techs are horrible. I have a tester and can troubleshoot certain area if directed. ...

...be adjusted louder or softer by the volume control; but the audio itself doesn't work. The TV is directly cable connected to the VHF/UHF on the back of the TV. The sound was working find but the ...

...the connections in back. you can also try bypassing the cable box by connecting the cable wire directly into the tv to see if it's the tv. if it is the cable box try unplugging it for a minute ...

...sound like a tuner problem otherwise). If you have external Audio/Video jacks with cables hooked up to the Direct TV box, move the video cable and see if you lose video when it is jiggled. If so, you ...

...is still not sound. With the cable box connected there is no sound nor when the set is connected directly to the cable coax line into the wall jack. Any idea how to correct this? Thanks. Ron Hi, A ...