Sony FD Trinitron WEGA KV-32FS120 32" TV "crt blinking 10" Questions

t come on green on light blinks, checked resister on crt board, checked for cold solder joints. All we had to do was unplug the TV and turn it back on after about 10 seconds. See if that works for you

KV HR36 Sony Wega, 10 blink and turn off... Hi, I have 3 year old sony wega and when I turn on, sound comes without any picture and green light blinks. After few blinks it turns off and the red light ...

Blinking picture After turning on the TV, the picture blinks off and on for awhile until it warms up for a few minutes. Common problem on older SONY = BAD CRT ....replace TV...........................

10 times and keeps and keeps repeating this until the TV is switched off. Keep trying this same thing happens These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur

...crt panasonic tv. Is it worth fixing? How much will it cost to fix?(approx.) test your remote first by placeing in front of a cell phone camera and press any button on the remote and look for a ...

...10 years old and is I beleive about a 25" or 27" set. The on timer light in the front of the set began blinking yesterday. The remote does nothing and even when the set has been unplugged ...

...Symptoms and red light blinking 10 times shows that DG board is defective in this tv and it is available HERE for $119 These info will help you to decide about get tv repaired or buy new tv.

TV Sony Wega Trinitron turns off automatically, blinks 10 times Can you please advise free of charge what the problem could be. The above TV (KV-HR36) will turn on but turns off automatically and the ...

sony trinitron tv. when i put on my tv the on light blinks no picture but sound for 5 to 10 mins then picture comes on then picture blinks in and out for 1hr before comming stable. Bad picture tube = ...

...10 years old. Picture blinks on and off whle watching. Started ocassionally, and has gotten progressively worse. Fixable? yes this can be fix. this is cold solder issue please apply fresh solder on ...