Sony FD Trinitron WEGA KV-32FS120 32" TV "crt 10 blink" Questions

t come on green on light blinks, checked resister on crt board, checked for cold solder joints. All we had to do was unplug the TV and turn it back on after about 10 seconds. See if that works for you

10 blink and turn off... Hi, I have 3 year old sony wega and when I turn on, sound comes without any picture and green light blinks. After few blinks it turns off and the red light blinks for 10 times

...done is adjust the Screen Control on the back of the CRT Board up just a tick, I've worked on alot of these tv's and 9 times out of 10 thats the problem, however a qualified tech should do this. ...

Why my Sony Wega tv standby light blinks 10 times? Green light comes on flashes 10 times then goes to standby red which flashes 10 times and keeps and keeps repeating this until the TV is switched off

...crt panasonic tv. Is it worth fixing? How much will it cost to fix?(approx.) test your remote first by placeing in front of a cell phone camera and press any button on the remote and look for a ...

Don't have the model number with me at this time. The set is approximately 10 years old and is I beleive about a 25" or 27" set. The on timer light in the front of the set began blinking ...

Plasma tv stop and power light just blinks. Try unplugging and waited to cool down. Still just blinks. Model th-42pz77u Hi, Symptoms and red light blinking 10 times shows that DG board is defective in

TV Sony Wega Trinitron turns off automatically, blinks 10 times Can you please advise free of charge what the problem could be. The above TV (KV-HR36) will turn on but turns off automatically and the ...

sony trinitron tv. when i put on my tv the on light blinks no picture but sound for 5 to 10 mins then picture comes on then picture blinks in and out for 1hr before comming stable. Bad picture tube = ...

...10 years old. Picture blinks on and off whle watching. Started ocassionally, and has gotten progressively worse. Fixable? yes this can be fix. this is cold solder issue please apply fresh solder on ...