Sony KP-51WS500 51" Rear Projection Television "standbye" Questions

television picture will not turn on, stays in warm-up/standbye mode, red light flashed 6x's pauses and continues...Sony KP-51WS500 51 in. Rear Projection Television television picture will not ...

SONY 50''WEGA-GOES TO STANDBYE AND FLASHES 3 TIMES AT POWER ON THE TV TURNS ON BUT GOES TO STANDBYE AND FLASHES THREE TIMES..PLEASE HELP.. Ur power ic inverter board is dead. U need a new one. Check ...

...time both the green timer and green led lite at the same time then 6 more flashes between the red standbye and green timer and then the red standbye stays lit and i hear a final click. It did this ...

standbye light comes on but tv wont start Probably similar problem to that I've got. On inspection found Inverter board blown up, due to the cheap capacitors having blown. I can't get a cct diagram ...

funai mopdel nlc 3204bc the standbye light flashes red sometimes it will stop and you can switch the tv on sometimes though when green light comes on it will start flashing red again any solutions? ...

it keeps going on to standbye every 5 seconds and it changes but it dont stay onmore then 10 seconds what could be causing this Lamp will be the problem if it has never been replaced. Mats Electronics

...time both the green timer and green led lite at the same time then 6 more flashes between the red standbye and green timer and then the red standbye stays lit and i hear a final click. It did this ...

...screen went black after the screen had been bowed and triple everything, occasional sound. The standbye/timer light flashes in unison with a clicking noise in the left rear of the tv. filters

...is the difference betwee the ballast and the power supply The power supply is what provides all the standbye voltages that get routed to the various other boards. The capacitors have to be unsolderd ...

sound comes on, but know picture then unit shuts off. Standbye light blinking 10 times pause then cont. 10- kp51ws520 Check Q8014 and Q8013 for shorts, leakage, or bad solder connections on the " D" ...