Question about Freezers
pressures for a Flex Ice Machine using 404a refrigerant can vary depending on several factors, including the ambient temperature and the load on the machine. However, here are some general guidelines:
...pressures are 50/280 its a 404a system. what are the normal pressures For a 404 system pressures should be about 60/350 Remember when you recharged always with the freon drum upsidedown so liquid gas ...
404a system and you charge thru the suction as a vapor. I had a memory lapse and have charged 410 systems as a liquid thru the suction side with success . after realizing what I did I shut system down
...404a freon, cap tube system.what is normal pressures thanx steve Normal operating pressures will change as the freezer reaches the selected temperatures on the inside. Normals of minus 14 degrees on ...
...404a , cro valve replaced,drier replaced system flushed with rx11. System appears to be operating good brings unit down to -15 . amp draw 7.2 restarts great cro valve working. my problem is suction ...
...404a the head preasure risies to over 400 psi i think it is the txv advise me if i am right There are a lot of variables that cause high head pressure. Be sure the cool ing fan is operating properly. ...
...404a. is there any rule of thumb to make it easy to remember those important parameters or formula in refrigeration. why yes there is. Generally speaking, the head pressure should be around the ...
Question about Freezers
pressures be on a reach in freezer that uses 404A refrigerant Generally, low side is around 20-25 PSI and High side is about 235-250 when unit is close to operating temp. Expansion device effects this
30 questions posted
Usually answered in minutes!
39 Questions
34 Questions
23 Questions