Question about Panasonic Televison & Video
...RF-in cable. The channel with the problem will likely show if the unit comes on all the way to 'normal'. While the RF-in is detached, you should be able to program that channel ...
...RF Output Channel 1-Set TV to Channel 4 2-Insert a prerecoeded tape into the unit 3-Press Source until VCR light is lit ~ if noise is seen on TV screen, press (VCR/TV) on remote 4-Press play> once 5- ...
...RF IN on your cable box Connect the red, yellow, and white RCA Cable to the front or back of your TV and to the audio out and video out on your pd-dvr100Press the SETup button on your remote use the ...
...RF lead and Scart lead connected in and also BOTH connected out to the TV. When you record from TV use channel numbers, when you record from cable use AV channel, (on DVD). When watching TV use TV ...
RF (channel 3 or 4) to see the output of the Magnavox. You need a RF modulator or separate video/S-video and audio inputs. The antenna signal is passed through the 2160 for analog signals.(and digital
...RF channel..thus no TV signal was available during recording .. I assume that your DVD recorder has built in TV tuner in...To correct the problem,first you make an automatic Ch set up ,search the ...
...RF input to your tv? The TV would have to be in TV mode in this case and on the correct channel ... I would imagin Channel 3 or 4 of the old NTSC style TV channels. Most TV's still do those - even ...
RF-IN pin at rear of DVD recorder, turn it ON and press SETUP, then CHANNEL, then select Auto Channel Setting, this will enable dvd recorder to scan all available channels and store in its memory. Now
...channel 3or 4,if you don't have RF out try going into tv through the video input (red ,white and yellow plugs) this may be easier and you will get better picture.If your not sure let me know I can ...
75 questions posted
Usually answered in minutes!
339 Questions
335 Questions
292 Questions
276 Questions
218 Questions
