motion detector has been "learned" or programmed into your system. It may be difficult to remove it without a knowledge of how to de-program and you'll also need an installation program manual. A much
...motion detector? i dont know how to set my simon 3 motion detector and i dont have my manuel any more You have to put the motion in sensor group 17. You will see this list near the back of the thick ...
Question about Heath Zenith Home Security
...motion detector. The most common problem with a motion detector is a sensor that is obstructed or dirty. Remove any dirt, grime or anything else that may be blocking the view of the sensor. If you ...
Question about DSC Home Security
...Motion Detector & Glassbreak Sensor: How do I remove the cover in order to dismount one of these units that was installed by someone else? The manual is not very clear about how to remove the ...
...motion detector. Before replacing I would strongly suggest you first remove all power from the system by disconnecting the backup battery inside the control panel then pull the system's power ...
Question about GE Home Security
...mode to activate motion detector I bought a extra motion detector and my manual dont show hot to program it HELP! Remove the mounting plate (on the back) and press the button, or trip the
Question about Honeywell Home Security
...motion detector. My system is wireless. At the back of the motion sensor, there is a button. When pushed in, the light does not light up. When released, it lights up. However, when the detector is ...
...motion detector? I removed the detector of the wall to paint. While it was off, the red light flashed on and off when there was movement. Replaced the detector on the wall, no Red light. Meanwhile, ...
16 questions posted
Usually answered in minutes!
2 Questions
10 Questions
