...OUTPUT SRAGE FAULTY. FIRST CHECK SUPPLY VOLTAGE 18VDC. THEN CHECK OUTPUT VOLEGE 15VDC.IT IS UPNORMAL FINALLY CHANGE VERTICAL OUTPUT IC.BEFORE CHANGING IC CHECK ALL THE COMPANENTS IN THE ...
Question about Televison & Video
output transistor. Check the input voltage to LOT. If the voltage is absent check the feeder resistor; if any. If you wish to get some details; check the site linked here. Surf the site with patience.
components specially reg.output &asso.parts 6 it power output becomes ok. 7 check hori section(osc,driver&output)if not repair it. 8 connect h/output supply. check loose contact if any. put on the set
...output transistor. Check the input voltage to LOT. If the voltage is absent check the feeder resistor; if any. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or ...
Question about Symphonic Televison & Video
...output transistor. Check the input voltage to LOT. If the voltage is absent check the feeder resistor; if any. If you wish to get some details; check the site linked here. Pull up older posts. ...
loose. check supply to sound output stage. check components related to sound output stage.like low value resistor & coupling capacitor. check for loose print in sound output stage. hope this will help
for that you check h/output,cap & diode in flyback section & flyback transformer. but power output is still 50v then problem in power supply for that check oscillator ckt & switching output. good luck
...is always burn the vertical output it is due to high voltage output from flyback transformer so please check output supply from power supply output. if it is ok every thing will be normal. good
loose. check supply to sound output stage. check components related to sound output stage.like low value resistor & coupling capacitor. check for loose print in sound output stage. hope this will help
Question about Samsung Televison & Video
...image.The manufacturer is samsung model cs-21z68mg. Check its horizontal output section circut for the fault. Most probably, line output transformer might be faulty. Not, might be, but
64 questions posted
Usually answered in minutes!
2,410 Questions
1,124 Questions
809 Questions
789 Questions
510 Questions