Samsung DLP HL-P5663W 56" TV "lamp temp blinking" Questions

...fan inside the set is not operating properly. 3. If Lamp and Standby/Temp blinking --> The lamp cover on the rear of the set is not installed properly. I hope that solve your problem.

...Lamp Light, Red Timer Light, and Red Standby/Temp Light) blink. Manual suggested this may be a bad lamp so I replaced. This has not resolved the issue. Same exact problem exists. New lamp has never ...

...Lamp, standby/Temp).I would advice you to open the back cover of your unit, fixed the lamp door safety switch with the tape to make it in closed position( if it is on open position the unit will not ...

...down, do the LEDS on the front blink? There are 3 of them. Standby, temp and lamp. Do any combination of the 3 blink when shuting down. I could tell you where to start just by those lights

...lamp shuts off. Then temp light blinks once (rest) twice (rest) until the fan turns off. Any ideas? Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one ...

...temp and lamp lights blinking... won't turn My (?) 56" Samsung DLP TV won't turn n. The three lights on the front panel are blinking (time, temp, lamp) What is wrong and how do I get in home service? ...

...lamp temp board wire is not unplugged then you definitely have a ballast problem. Those are the only components that can cause the lamp to fire. The lamp temp board is a little board on top of the ...

WHAT WILL HAPPEN IF THE LAMP DOOR SAFETY SWITCH ISN'T SET RIGHT The Lamp and the Stand By/ Temp lights will be blinking and the set will not be able to turn on.

...and the Standby/Temp blinks once. The LED then starts blinking continuously until it stops and the SB/TEMP goes solid. Any ideas? It might be the lamp unit which is LED and not a usual type of

What tips I could do? No picture nor sounds all black screen like I never turn it on. The lamp thing is blinking and temp too. bad lamp.