Samsung DLP HL-P5663W 56" TV "ballast" Questions

TV WILL NOT POWER UP TURN ON TV CHECK VOLTAGE TO BALLAST GETTIG 410+ **** LAMP WILL NOT LIGHT HAS NEW LAMP HOW DO YOU CHECK BALLAST The ballast uses open ended high voltage. Both the start current, ...

...and the switch is pushed back into place as it is supposed to be then the issue is most likely your ballast. The ballast can appear to be the same symptoms as the lamp. If the lamp itself was not ...

...Tv blows bulbs about once a month You're definitely not having a lamp problem. It can be your ballast not providing your lamp with the correct amount of voltage. Lamps should last a minimum of

...DLP (#HL-P8085W) unit. I get no picture, but do get sound. I have replaced the lamp & lamp ballast. I still get no picture, a high pitch whistling sound and the unit attempts to recycle on ...

REPLACED LAMP AND LAMP BALLAST IN SAMSUNG HLS6187 - NOT WORKING REPLACED LAMP AND LAMP BALLAST IN SAMSUNG HLS6187. STAYS ON FOR 15 MINUTES, SCREEN FLASHES AND FLICKERS AND THEN GOES OUT. ALL 3 LED ...

...3 leds. so i figured it blew the lamp. replaced that. still nothing.3 leds. nothing more. i figure ballast but is there anything else before i go and spend that money too. ballast or smps board ...

...which you rteplaced is not seated properly.and also it can be the problem of colour wheel or the ballast.to check out all three just check out this links 1 by 1 for colour wheel with diagram and ...

...SP5OL7HX It seems to be that the tv is recycling, this issue is common when there's a defective ballast. You could replace the ballast first and it's most probable you issue will be solved

Ballast How can you definitively tell if the ballast that powers the lamp is bad? I replaced my lamp, then needed to replace the color wheel (which was shattered internally), and now there is a ...