Vizio E500i-B1 50-Inch 1080p Smart LED HDTV "backlight picture audio" Questions

picture is not this black and light acontra the image, not light the lamps to illuminate the screen A LCD may have backlights but Plasma sets do not for the most part.If backlight does not come on--no

backlight so you can see the picture. If the picture just goes off intermittently then that means that the backlight is being turned off. And since the inverter board powers the backlighting you might

...inverter backlight board is dead.Replaced this LCD inverter backlight board will get ur picture back.Tries Shopjimmy.com,Ebay.com to buy a refurbish LCD Inverter backlight board for the

...picture comes back only to stop again after few minutes. Sometime the tv works for hours without interruptions though.. Bad power supply or backlight inverter. If the backlight is not turning on, you ...

...backlight, the picture is actually on the screen, but you aren't able to view it because there is no light to illuminate it. These CAN be repaired, but the cost of new TVs makes it almost most ...

...picture is viable. The TV originally had a classic dead backlight. The toshiba logo flashed, and then the screen went black. A flashlight revealed that the LCD panel was functional. Just that the ...

...backlight remaining. The audio was coming through fine. Now the picture won't come through at all, and just "Bravia" will show on startup occasionally and the black, backlit screen appears, audio ...

...picture does not come on After 5 seconds the backlight goes off. audio is still on What part do I need to replace to fix the picture? Hi John, From what you have described, it seems that the tv is ...

...picture is absent, the backlight section circuit should be checked. In most cases, it will be best to replace the backlight inverter board as card basis. If you do wish to get some details, check the ...

...backlight working, the picture is removed, but the menu is still displayed). The second OK activates the option. The backlight is turned out. Finally, the second menu key press turns the backlight ...