car and the key chain thing on my keys replaced what else could it be. My first question is has it been programed? This is a simple process of cycleing the key from off to on 7 times with leaveing the
...car.) Turn ignition to OFF. Acoustic signal will sound and system warning lamp will illuminate to confirm programming mode. Within 10 seconds, press and hold any button on the first keyless remote. ...
...be heard when the car accepts the button press ) now do the same with your old remotes too. either switch the ignition back on or wait until the timer runs out on the programming mode & your ...
Remote key fob suddenly stopped work Cannot lock car with remote key fob. They suddenly stop working, have replaced batteries car did lock then stopped again when I came to lock up the car. Key still ...
...horn respond when I press the remote button to check the perimeter anti-theft system to see if the car is locked. What could the the problem be? Driver door module is where to look also a broken or ...
...car and close the door. 4. With a second key, physically lock the doors (don't use a remote). 5. Take the first remote to be programmed, press one of the buttons and the lights will flash once. Wait ...
car keys? i have lost my remote control car key,but i got a spare key ,the person to fix the problem is comming tomorrow,so wha t should i do in the mean time to avoid any possible theft? just dry the
keys lock doors but will not open them I have focus 1.8 td estate w reg. I have 2 keys master and remote, a little while ago both keys ceased to open doors manually but would still lock them.Although ...
car.) Within 20 seconds press any button on the first keyless remote to be programmed. Door locks will cycle to confirm programming. If you only have one remote then skip to step 4. Within 20 seconds,
25 questions posted
Usually answered in minutes!
3,749 Questions
2,612 Questions
2,055 Questions
1,226 Questions
897 Questions