Samsung HLR5667W 56" Rear Projection HDTV "turn dlp tv back" Questions

...turn it back on there is no time it just goes directly to the 3 lights. I was wondering if it is a lamp problem or a power source problem. This is an on-going problem with DLP sets. Normally you shut ...

...DLP television by Samsung. My set will randomly turn off after different periods of usage. I believe this is due to the fan not turning on and the lamp is overheating. I do not have the green lamp ...

...dlp tv when we turn on the tv sometimes, there are purple, blue and green lines going verticle. you can't see any picture, just these colored lines. we get sound. sometimes we turn it on and ...

...DLP is shutting off or won't turn on, a bad lamp is the most likely cause. To replace the lamp, remove the lamp cover from the back of the TV by removing the screws with a Phillips screwdriver and ...

...DLP. PS IF YOU EVER NEED TO CHANGE THE ENGINE YOU WILL NEED A CODE TO ACCESS THE HIDDEN MENU TO FLIP THE SCREEN RIGHT SIDE UP. THE ACCESS CODE IS TURN OFF THE TV ONTHE REMOTE HIT MUTE THEN 182 THEN ...

...DLP TV. Turn the Samsung around so that the back is facing you. Make sure the Samsung is unplugged from the AC socket. 2 Use the Phillips screwdriver to remove all of the screws from the back panel. ...

...dlp tv picture turns off sound stays on Tv turns on and stays on for 10-50 mins then picture goes black but sound stays on. Looked up reasons found one that said the dlp chip was going bad replaced ...

...turn off during a program....any suggestions I have Samsung DLP HL-R4266W bought in Aug.2005. Now it has no picture, no sound. After replacing new lamp, the same problem remains. I was also told it ...

...DLP is shutting off or won't turn on, a bad lamp is the most likely cause. To replace the lamp, remove the lamp cover from the back of the TV by removing the screws with a Phillips screwdriver and ...

My Samsung hlt5656W DLP tv will turn on and within a few seconds turn back off -- The picture will sometimes come back on for a couple of seconds, then back off again bad lamp