Samsung HLP4663W 46" Rear Projection HDTV "dlp tv turn until" Questions

...DLP keeps turning off when It is first turned on. It will keep doing it untill the tv warms up. Please let me know what could plossibly be wrong. It is mainly because you have a leaky electrolytic ...

...dlp SAMSUNG TV-HL-S5087W THAT TURNS OFF I HAVE A 50'dlp SAMSUNG TV-HL-S5087W THAT TURNS ITSELF OFF AFTER AN INDETERMINATE TIME. THIS CAN BE A FEW MINUTES OR DAYS. CAN TURN IT BACK ON & WILL BE OK ...

DLP HL-P5063W When I turn on the TV, the lamp led flashes for 30-45 seconds, I get audio for 30 to 60 seconds and then video for perhaps 5 to 10 seconds before the entire unit shuts down. After the TV

...dlp tv. I recently started having problems with vertical lines across the screen. (e.g. lll lll lll lll) They are in sets of 3 or 4 about an inch apart, with a larger space between each set when a ...

...until shut off. please any ideas ward Hi, If lamp has not been replaced in tv in last 2-3 years then it seems time to get it replace. Lamp replacement procedure is easy and written in user manual of ...

...DLP TV has no picture but does have sound until all three lights start to flash and then the set turns off. Purchased a new lamp ($131.00) and that did not change anything? according to the book when ...

...dlp tv and it has nothing with colors or picture flicker. TV goes to protection mode because of some internal problem as mentioned above. If you wish to repair tv by yourself then you should have ...

...DLP TV has been working marvelously. You can try this procedure and see what it does for you. The only thing this has cost me was time of less rounded about 30 minutes. It's a little late, but ours ...

...tv is Samsung DLP HL-P4663W 46 in. Rear Projection HDTV-Ready Television After having our TV on for about 45 minutes it starts to make this hissing sound which starts low and gets louder and louder, ...

...DLP TV is acting erratically, Samsung recommends turning the set off and unplugging it for 30 minutes. After 30 minutes plug it back in and turn it back on. Unplugging the set resets it, and that may ...