...change to tape 2 when tape 1 is done)? Hello make sure you full rewind the erase tape on the deck 2 you will see the green light Ready, that?s when you can start the Deck 1to record when is ...
...power cord as you can easially receive a deadly shock. You have to remove 5 case screws, then the deck screws, then 2 pc board screws, 1 which is hidden in the slide control assembly. Remove the ...
Question about Sony Audio Players & Recorders
...side of unit is a switch for transcribe make sure is on the on position you are going to see on Deck A only lines on display, put your tape on Deck B is the only side that transcribes if the
Recorder double records and it is taking up tape space. Hello, Are you saying doth decks record at the same time? Below the key, there are lights for Sequential, Dual and Duplicate. i suspect it is on
Question about Audio Players & Recorders
...card, there will be a 3.5mm jack socket for line in. Use a male to male lead to connect to your deck. If there is no sound card, you can buy a cheap USB to audio lead on Amazon or
Question about Panasonic Audio Players & Recorders
...a the arm to get the circuit board out If your talking about the record lever just above the tape deck, there is a black plastic retaining ring at the top of the shaft. Pull this off with a pair of ...
Question about Panasonic Audio Players & Recorders
...pedal. It engages the mechanism but appears stuck when tape is inserted. Runs fine without tape in deck. The pedal works - it was tested on other unit. Otherwise, the unit rewinds, plays and fast ...
Question about Panasonic Audio Players & Recorders
...It could be the rewind solenoid is jamed up or there is a switch that comes loose under the tape deck. Either way, it will need to be serviced. ...
...any way I can fix this or do I have to buy a new transcriber? There is a switch on under the tape deck that wears out or comes loose. This is something that needs service. We can fax it. ...
machine will play cassettes but not rewind or ff Most likely the unit needs new belts. Also possible that a switch has broken. the switched is underthe tape deck on the circuit board.
24 questions posted
Usually answered in minutes!
491 Questions
91 Questions
82 Questions
74 Questions
53 Questions