Lutron Maestro 150-Watt Single Pole/3-Way or Multi-Location Digital CFL-LED Dimmer - Ivory MACL-153M-IV "red wire light switch" Questions

red wire from the wall. Why isn't the switch working?? Help!! HI, Usually there is only a red wire when there are 2 switches for the same light (a 3way) if that is the case you need a switch that is a

...red wire. My problem is I don't recall where the red was attached in the old installation. The new light has a white wire and a black wire along with a ground. The instructions that came with the new ...

...red wire labeled 3 way. My box has two black , white, red and groud wire. this room has two seperate light switches that control the light. Which wires go to which wires? When you take the existing ...

red wire - it should be connected to the fan hot wire, 4) one yellow wire - it should be connected to the light hot wire, the remaining wires (yellow with a "3 way label" and red with a "3 way label")

...wire and a red wire and the house box has two black wires and a red wire If the main box has 2 blacks and a red i would assume that the first black is either the live or the final wire that goes to ...

...wire a red wire and a red wire with a white stripe. What wire is what? This switch is for a 3 way system (2 switches controlling one light for a stairway or hallway). The black wire goes to the ...

...red wire the ground wire? No. It is most likely a three way dimmer, where the two black wires would run to the other three switch, and the red wire would either run to the breaker panel or the light ...

...red wires go onto the gold screws. This is incorrect and will only allow power to pass through when the switch is in one of the two positions. Hello Owen Marie, While the comments made by mikeb103 ...

red wire goes to another Load, which is unknown at this point. Add a comment for more free help. Say what cables and wires enter box, and what Loads you are controlling. Also add exact model number so

...red wiring with the same results. Thanks for your Help The correct way to wire this switch is the wire that was on the gold or dark colored screw of the old three way switch is called the shunt or ...