...feed dog I had the problem of feed dog dropping out while sewing. I opened bobbin door and reset switch next to bobbin back to sewing. The feed dog stayed engaged only for short time. The next time I ...
...feed dog is not transporting the fabric anymore and the needle just keeps stitching in the same place. is it broken or just needs adjusting? if you have a manual, look to see where the feed dogs are, ...
Question about Sewing Machines
Feed dog button is stuck in the in position won't come out to raise feed dogs? "FEED DOG BUTTON" ISN'T QUITE CLEAR. HOWEVER, THE FEED DOG IS CONTROLLED BY THE STITCH LENGTH. IF THE STITCH LENGTH IS ...
Question about Singer Sewing Machines
Yesterday, while machine quilting, I heard a clank. Now the feed dogs won't feed the fabric. The feed dogs seem to move back when I start sewing; it seems as if they stayed forward before... Did you ...
...feed dog I have a Viking 6690 that belonged to my mother. I cannot find the instruction manual and can't get the feed dogs to come up. She was quite the quilter so I suspect that they were lowered so ...
feed dog on viking 6690 are frozen down...how do I fix this Hello Mary There may be various reasons for the feed dogs staying down. Let's start with the most obvious .... The Viking 6690 features a ...
Question about Husqvarna Sewing Machines
lever is up then the feed dogs will feed the fabric, if the lever is down, then the fabric will stay in place. if the lever is up and the feed dogs are not working, then it's time to have them checked
...feed dog has a teeth, when your foot presser goes down attached to fabrics the pressure hold the fabric between pressure foot and feed dogs that why when machine run feed dogs pushed fabric when ...
...feed dog when they're too far down? Did you drop the feed dogs? If so, if you re-activate the switch, they should come back up when you begin to stitch again. However, if the feed dogs stay in the ...
feed dog is up but has stopped feeding Are the feed dogs moving at all--like moving toward the back of the machine, dropping down below the needle plate, moving forward, rising, and then moving toward
39 questions posted
Usually answered in minutes!
126 Questions
125 Questions
111 Questions
69 Questions