Sharp AR-507 Copier "copiers f2 31" Questions

fault code f2-31 how do i clear my copier is coming up with a fault code f2-31 how do i clear Need to know what machine it is you have

clear sharp F2-31 code Clean image density sensor on the drum unit and make sure the blade is cleaning the drum. Hello sir; There are only one way to clear F2-31 is replace image density senser.

...copiers about 13 years ago but don't have info on the F2 error. How do I get the copier to display the sub code? Can F2 be related to a Transfer problem? "F2-31"Image density sensor fault "F2-32"Drum ...

F2-31" Image density sensor fault "F2-32" Drum mark sensor fault "F2-33" Grid voltage correction problem "F2-35" Grid voltage correction problem "F2-37" Drum mark sensor fault Cause : CRUM chip defect

...F2-31 What is problem with this code? please give me advice also i'm looking for services manual.Machine runs fine on start up, after warm up less than 120second the code F2-31 come out and can't do ...

...F2- 31 , its the drum mark problem.The drum may be defective or the wrong drum fixed on a machine.Also clean the drum mark sensor on the drum unit. H4 is a fusing error. It isn't getting to the right ...

...F2-31 F2-31 = Process Control Error. This is usually just a dirty Image Density Sensor. If you are able to remove the drum unit check that the Image Density Sensor is not dirty or blocked. The IDS is ...

...F2 with sub code 31 - Image Density error, Check the light level or the drum surface reflectivity; F2 with sub code 32 - Drum Mark sensor, missing/dislocated mark or sensor faulty. Sensor cannot scan ...

...F2-31 or F2-37, Drum mark or image density. You can execute 44-6. This should show which is out of range. Pull the drum unit out & clean both sensors. Check that the blade is cleaning from end to ...

...F2-31 F2 31 Content Process control trouble (OPC base surface reflection factor is improper) Detail Usually the sensor gain is adjusted so that the output is a certain value, by reading the drum base ...