JVC HD-52Z575 52" Rear Projection HDTV-Ready Television "test tv ballast" Questions

Ad

...tv returns to stby (red light). Could it be the ballast or lamp or power supply. would appreciate any hint on this. Its your ballast. it has as short. i recommend changing the ballast. while you are ...

Ad

Question about JVC Televison & Video

1 Answer

...tv no picture i know about the lamp or balast thig just want to see if there is a way to test the ballast before i buy a lamp. im verry handy with a volt meter Sure, you can test by Use the ...

Ad

volts to ballast's small 5 pin connector (trigger voltage) and about 300V-330V to large 2pin connector. If both voltages present at the start and lamp is working with in another TV - it is bad ballast

...ballast was tested in another tv and worked fine. What controls the ballast on the power board that might have broken? I also have a hlp5063w that's doing the same thing and both the Ballast and Lamp ...

Question about Televison & Video

1 Answer

...ballast and got 325v; which should be 380v. How can you tell if the lamp is bad? you cant - unless you have another tv to test it in. May be a ballast or the cooling fan for the lamp is not

Question about JVC Televison & Video

3 Answers

...ballast and the TV worked fine (for 30 minutes) then turned off and gave me the red light lamp failure code again? I know my module is fine, I know my lamp is fine, could my TV be burning out the ...

Question about Panasonic Televison & Video

2 Answers

...tv and its turning into a nightmare, HELP!!!! At first i was thinking the ballast had gone bad but after reading a few other post i think it would be best to call pannasonic.. others forums read: ...

...TV and have the Lamp Ballast removed, but don't know how to test it to find out what's bad on it or if this is the root problem. It was pretty dirty a had to be blown-off with compressed air. I took ...

Question about Televison & Video

2 Answers

...ballast and the red lamp light came on after the TV was powered up,same problem.I then changed the power supply board(part#930B921002)when I powered the TV up,the TV shut down and the red lamp light ...

...ballast the TV cannot talk to it and run itself properly. Also using a xenon lamp will give terrible color reproduction as its not putting out nearly enough lumens in the right spectrum. It will also ...

Not finding what you are looking for?
JVC HD-52Z575 52" Rear Projection HDTV-Ready Television Logo

74 questions posted

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76140 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...