TP-LINK 300Mbps Wireless N ADSL2+ Modem Router TD-W8960N "power light flash 2 times" Questions

...light states are: Power - Solid DSL - Solid Internet - Solid or flashing quickly when data is being transferred. Ethernet - Only on and flashing quickly if cable attached to it and an active ...

...power light (it should stay there forever) then bring the gateway to Radio Shack or somewhere they have a 5 volt DC @ 2 amp power supply and plug it in for 5 to 10 minutes and see if the power light ...

...power supply. Wait 1 minute. 2.-Plug your modem back to the power and wait for all the lights to stop flashing. 3.-Plug your router back to the power and wait for the lights to stop flashing Follow ...

...Power on the router with the reset button still pressed down. 4) You will notice all the LAN lights flash at the same time which will indicate that the router has reset - this takes up to 30 ...

...Power on the router with the reset button still pressed down. 4) You will notice all the LAN lights flash at the same time which will indicate that the router has reset - this takes up to 30 seconds. ...

Power on the router with the reset button still pressed down.4) You will notice all the LAN lights flash at the same time which will indicate that the router has reset - this takes up to 30 seconds.5)

2 computers pugged into it at one time. Check all your wired connections, make sure they are good and connected correctly. Power off both modem and router and then plug modem in first and then router.

...power light The flashing blue light is absolutely normal!!! Please follow these steps to configure your computers to your wireless router Here are the recommended steps to connect to a wireless base ...

it doesn't power on or won't connect to the internet? If it powers on OK do the lights flash as described in the manual If the router worked before why should you need new firmware, doesn't make sense