...rubber pill contacts AND the traces oin the circuit board should be cleaned with 99% isoprophyl alcohol, nothing else. Use a Q-Tip moistened with the
...are conductive rubber. The conductive rubber buttons should ONLY be cleaned with 99% isoprophyl alcohol and Q Tips. Both the conductive "pill" and the traces they contact on the circuit board ...
...a Fleco. Try CAREFULLY cleaning the CD reading lens with a Q Tip moistend with 91% isoprophyl alcohol... DO NOT use rubbing alcohol. Check if your CD's have fingerprints or other contamination. ...
...are dirty. These are likely conductive rubber type and have to be cleaned with 99% isoprophyl alcohol. With the amount of disassembly required to get at the contacts, you best clean them all ...
...the tube? Many thanks, Mike. it sounds like an input jack or plug problem, first clean them with alcohol. try and clean the jack with a Q tip and
...several keys. Clean the pills AND the circuit board traces they contact with ONLY 99% isoprophyl alcohol and Q Tips. DO NOT use rubbing alcohol
it from a power supply. I hope this helps, good luck.. I had the same problem. I used 99% isopropyl alcohol from a local pharmacy (do not use rubbing alcohol) and a cotton swab to remove the corrosion
...the cd place you will see a little lense. Clean it VERY DELICATE with a piece of cottonwool with alcohol, can clean it twice with alcohol and then with a dry one. If doesn't help, then need to ...
...look for any corrosion or buildup on the circuit board then take a q-tip and dip it into isopropyl alcohol rubbing alcohol and just clean up any corrosion on the boards then look for the ribbon
...on them ...they don't appear damaged, assuming that is the problem, should i clean them with alcohol, or is there another way to re-condition them? and if that isn't the problem are there any ...
12 questions posted
Usually answered in minutes!
57 Questions
33 Questions
24 Questions
