the channel 1 the light red is on channel 2 work but the 1 don,t work As always with stereo amps the two channels are identical, so if one goes wrong you have the other as a control for testing ...
...jack , but the two input jacks from the same lead are not stereo tips. those two jacks go into an A channel and a B channel. The PA has a stereo setting so i am assuming the two input jacks were left ...
Question about Onkyo Audio Players & Recorders
...of the onkyo tx 905 not the home theatre model stero only 140 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic ...
akai am-u01 righthand channel sounds distorted/blown please can you tell me what components on the board to check/replace the left channels fine i have allready re-wited most of the board but cant ...
Sansui AU-D33 Lh speaker channel not working. Not output. Tried speaker cables in rh channel and speaker works. Has been crackly for some time but turning the volume control right up used to activate ...
AMPLIFIER CENTER CHANNEL NOT FUNCTIONING yamaha dsp-A3090 center channel not working no sound output from souce. Center channel will not work unless unit is set for Surround or Pro Logic. Make sure ...
Question about Crown Audio Players & Recorders
I have a crown 602 channel 2 shows signal coming in, but no volume comes out. Yet when its bridge it seems to put out more power than just one chanel. Not sure where to start looking into the #2 ...
Question about QSC Audio Players & Recorders
channel 1 works fine but channel 2 doesnt put out anything. how can i fix it? if you have indication of signal input for both channel you can go and reverse output cables of the speakers if the ...
lot of noise in both channels Determine if the amplifier has an output IC for both channels or if the channels are individual powered. If it has only one IC for both channels it will have gone! If ...
cambridge v2.0 cd One channel out and already resoldered bad connections! This one is a beast!!! When dealing with stereo amps you should treat them as two mono amps joined together. So if one channel
17 questions posted
Usually answered in minutes!