Wolf Range 18 in. SPR-100 Gas Cooktop "burners stay high" Questions

burners stays on high. can that be fixed? Hello, Thank you for your post. Sounds like your having a problem with one of the burners on your cooktop. Yes, you can have this fixed. The burner that stays

...burners. Left front burner goes to high with any setting on the switch and stays on low setting when turned off. I replaced the infinite switch on the left front burner, but problem still exists. Did ...

We have a GE Profile, smooth top stove. Normally when you turn on a burner, it heats up for a minuteg, switches off, and then back on and off again throughtout the cook time. Just recently our big ...

right front burner on high all the time. On my jed8430 the right front burner stays on high all the time it is on.How do I replace switch if needed,do I have to remove unit from counter? Yes, the ...

tripping breaker electric breaker tripped, attempted to reset and observed flash in one burner element. Any solution? Replace the burner and receptacle and you should be short free. You may also need ...

...high, then use a lighter with the long spout on it to light the flame by moving the lighted flame to towrds the burner slowly. Make sure to use the type of lighter that allows you to stay back so you ...

one of the elements does not regulate stays at high temperature When the ring is turned on it goes to maximum temperature and stays there its either on full or off. the model is a belling 628GM ...

JP930 large right front dual size burner. When you turn on the burner, it stays on HIGH, will not regulate at all regardless of setting. It will shut off when moved to off position. Which part needs ...

lg STOVE MODEL LST5651SW BURNER STAYS ON, DIDNT NT TURN OFF OR COOL DOWN ONCE TURNED ON Its not the burner, but the switch or relay it controls. With a meter you can track it down an order the part ...

...switch until I can have this fixed. sound like you have a shorted element, it will stay hot but not high heat hot (glowing) red, other posibility is bad infinate control switch that switch could be ...