Microsoft Xbox 360 Console "1 letting connect controller" Questions

...1) connected you may need to reintroduce the controller to the console. Press the connect button on the console and on the controller to introduce the two to each other. Here is a good reference site ...

1 day, it wouldnt connect! I have pressed the little button on the console and on the top of the control and all that happens is the green lights flash loads of times and then stops. It doesnt stop in

...1 | Press and hold the Xbox Guide button until the controller turns on. The Xbox Guide button is the round button with the green "X" near the center of the controller. Step 2 | Make sure that your ...

1. Turn on System 2. Turn on Controller 3. Press and Hold the connect button on the controller (located between the RB and LB buttons) 4. While holding the connect button on controller, press and hold

...letting the world enjoy this fascinating machine, so... Yes it does have some minor flaws, but its worth it for what it cost and is not hard to fix at all. The Solution: 99% of them time, no matter ...

...1. First connect the Xbox 360 and the PC using the Ethernet cable. 2. Double Click your Dial-up Network connection and wait for it to connect. 3. Choose "Start Menu" and then choose "Settings" then ...

...1 but its still the same problem Try this when you have the xbox off hold the white sync button on the controller itself while holding the sync button press the center x box button to power on the ...

...controller or usb stick)(music ect ect)....either to the 2 front usb slots or the 1 at the back.......?? if this is the case un-plug EVERYTHING from all used usb slots........ now try powering up the ...

1) switch off the console. With the console switched off, press and hold the sync button (the small white button that is used to search for wireless connections). While holding the sync button, switch

1) switch off the console. With the console switched off, press and hold the sync button (the small white button that is used to search for wireless connections). While holding the sync button, switch