Symphonic ST419E TV "go video" Questions

...from cassette machine to tv-vcr combo in video and audio connections. the machine that youare going to play the tape in you should use the video out and the audio out to the video in and audio ...

...remote i go thru video selection until i get to video 5. What am i doin wrong? The tv is a 42" fujitsu plasma vision with avm2 2008 model. On the video selection you have to go to HDMI and not video ...

...remote has no S-video option and the menu has no place to add S-Video to the TV/Video cycle throughs, just Video 1. How do I get it to go to S-Video? Just put it on video 1. that is the S-video

...go on video or cable or ant Should go to coax fitting depending on output from sat---if there on catv and usually channel 3 or 4 whatever sat is set to out.Via the audio/video out to the same in on ...

...go to video input. The tv only displays channels 2- 99. How do I get the tv to video so that I can use the rca inputs in the back of the tv? A universal remote in most cases can not switch this TV ...

...go the the video circuit on schematic and find the video out transitor or ic or whatever they use, check to see if proper voltage or better yet see if got video with a scope, I see allot of shorted ...

...now you can try to physically go to the channel down button on the tv. keep pushing it until it counts down the channels, then it should go to video 1, video 2, line video, front video. fixed!

...go to black and white. If I unhook the video jack or coax or RGB or S Video, or if I turn off the TV...when I turn it on again it reads "Unusable Signal" , but I can still hear the audio. Any input ...

i dont know how to put video 1 an video 2 on my i dont know how to putt video 1 an video 2 on my tv get your remotethen look for video sourceand press it then there you go

...4 to watch the tv. I have component video coming into the tv from an onyko receiver with no audio going to the tv. I suspect something is wrong with video 4...how can i change to video 3 to check? ...