2010 Hyundai Accent "spark plug removal" Questions

...spark plug wire, replace that plug using a spark plug socket,vturning it counter clockwise, replace spark plug wire, and repeat until all of youre spark plugs are replaced. Hello,

Replacing ...

...spark plug. if it is fireing at plug, check to make sure it is getting fuel. ( should be able to smell fuel on the electrode end of spark pug). If it is getting fuel, and spark, you may try removeing ...

how do I change spark plugs on a 2010 hyundai accent location of spark plugs you need to remove the ignition coils and you goin to see the spark plugs

spark plug socket put plug into the lead you removed and hold close to something metal while someone turns the key and you should see a spark come out and hit the metal, if not try replacing the rotor

...spark plug, but disconnecting the wire as the engine is running. If it runs rougher, then that plug was good. If there's no change, then that plug may be bad. If it runs rougher, it could also mean ...

car turns over but wont start -water appears to be coming from exhaust Remove the spark plugs and do a compression check, there has to be at least 80 psi to even fire the cylinder, check the spark ...

...spark plug socket on the end of it and just put it down in the hole. You didn't mention the model or year of your hyundai but in many of the Hyundais, this is the case. I know in all cases the ...

spark plug wires check if there in properly on. Another problem when a car idle check for any small vacuum or air leak from a hose. you work as follows1) remove your battery terminal with spaneer &

i need help changing my spark plugs on my haundai accent 2001 you did not give enough info. i think you need to remove the plastic cover on the top of the engine held on by two screws.you can the pull

...spark by taking a plug wire off a plug and connecting it to the tester and then having someone either crank the car while you hold the end against a metal part on the engine or finding a way to do it ...