2011 GMC Acadia "thermostat hose remove" Questions

Ad

...thermostat components. The bottom line is that you must now either remove the lower radiator hose or use a siphon to remove coolant from the radiator. This bulletin applies to all 1998-04 GM cars and ...

Ad

...hose to the thermostat housing. Using a small flat-bladed screwdriver, release the hose clamp retention lock at the thermostat housing. Fill the cooling system. FIG 1 FIG. 2 Good Luck and Merry ...

Ad

...hose from thermostat housing. Disconnect electrical connector from coolant sensor. Remove throttle body cooling hose. Remove thermostat housing attaching bolts, then remove thermostat housing and ...

Question about GMC Acadia

1 Answer

...hose from thermostat housing. Remove top thermostat housing bolt. Loosen and almost remove lower thermostat bolt. You will need to slide your wrench and hand under the exhaust crossover pipe to gain ...

...hose. Remove the thermostat housing Loosen the thermostat housing mounting bolts. Remove the housing and pull the thermostat from it. Replace the thermostat Inspect the new thermostat and install it ...

Question about Cars & Trucks

2 Answers

...hose. Thermostat : 1. drain coolant and tighten drain plug ( easier method : remove radiator cap, get big drain pan, place drain pan under lower radiator hose to radiator connection, remove clamp, ...

...hose to the thermostat housing. Install the crossover exhaust pipe. Install the air cleaner and duct assembly. Fill the cooling system. 3.5L Engine Before servicing the vehicle, refer to the ...

Question about GMC Acadia

1 Answer

...Housing cover. Torque bolts to 8 ft-lbs (11 Nm) Lower radiator hose to the thermostat housing Stud bolts. Torque to 10 ft-lbs (13 Nm) Hose bracket. Torque nuts to 89 in-lbs (10 Nm) Intake ...

Question about GMC Acadia

2 Answers

...hose to the thermostat housing. Install the air cleaner outlet duct. Fill the cooling system. Check the cooling system for leaks. 3.5L Engine (LX9) W/O Variable Valve Timing To Remove: Drain the ...

...hose to the thermostat housing. Secure the hose with the clamp. 5. Install the generator. 6. Fill the cooling system with specified coolant and concentration. Follow the correct cooling systen bleed ...

Not finding what you are looking for?
2011 GMC Acadia Logo

79 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29492 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...