SkyScan 86742 Digital Atomic Wall Clock "sensor" Questions

...Outdoor Temperature and Alarm will not display outdoor temp, i have replaced batteries, outdoor sensor is transmitting, does not appear to "sync" with receiver After replacing the ...

after changing batteries in both the outside sensor and the inside clock I no longer receive a reading for outside temp. I have a thermometer with an outside sensor. It's necessary to remove both ...

...Simple, the instructions state that when changing the batteries on the outside temp. sensor, you must also change the batteries on the main clock unit. I had same problem when I

No outdoor display on clock I replaced my old batteries in clock and outdoor sensor. Since doing this my clock will not display the outdoor temperature. I tested the batteries and they are fully ...

...batteries to start it up again? I have lost my manual... you probably need to 'pair' the outdoor sensor with the main base: look for a 'channel' button, as these units usually can get information ...

...embossed on the battery door of the indoor clock. Replace the batteries in the remote temperature sensor first. Remove/replace the batteries in the internal display unit. Reception for the atomic ...

...side temperature reading Lost outside temperature reading. Removed batteries from clock and outside sensor and waited 30 min. When batteries were installed temperature and clock functioned properly. ...

...but the outdoor temp & humidity It is old it could be wore out ! Check the battery in the outside sensor. If the outdoor sensor is hard wired to the clock (or fresh batteries doesn't fix the issue) ...

Where would I find a replacement sensor online?? Thanks so much, Brenda What does the sensor go to Brenda?

outside temperture does not display on clock Make sure the out door sensor has fresh batteries, and that the clock inside is close to the location of the sensor outside so they can connect. If none of