Konica Minolta magicolor 2300DL Laser Printer "fuser replacement" Questions

I have a Konica Magicoloe 2430 dl printer. Is it hard to replace the fuser unit? If your not mechanically incline don't bother to replace. To replace the fuser unit remove transfer belt,back ...

need to reset the fuser counter need to reset the fuser since I replaced the fuser, but printer still thinks the fuser needs replacing - cannot find where the fuser gets reset this is a Konica Minolta

get message of fuser low therm 1F get message of fuser low therm 1F One of the two small thermostats, that are called "snap-action disc thermostats" and control the electricity flow to the fuser lamps

In Konica Minolta 2430dk, I had a media jam in the fuser. I cleared the visible paper, but there is still some stuck inside the fuser that is impossible to clear (I can't get my fingers to it), so ...

media jam fuser After printing show on the display "Media Jam Fuser". Bright error. After that I have to shut down and turn on the printer to be printed up again. So each time you print. replace the ...

media jam fuser error window says media jam fuser - how can I correct the error? replace the fuser unit

Magicolor 2200 error Service Call 1f fuser low therm What does this mean? We just replaced the transfer belt (cost $365), and then got this additional error message. Thanks in advance for any help you

what is media jam fuser error We are getting an error message that says "media jam fuser". What does that mean? How do we fix it? It means there is a paper jam in the fuser (the hot part that fixes ...

media jam fuser My printer is pulling paper all the way through and leaving it blank. (printing blank pages). After producing a blank piece of paper in the output tray, the printer immediately goes ...

...is smearing After replacing the cartridge, I am having my printed documetn being smeared The fuser must be dirty. Change the fuser. It is also possible that the rollers along the paper path is ...