in the main unit. Do not touch any of the buttons. Wait 10 minutes. If the remote temperature is not showing within 10 minutes, try again. Once the remote temperature is showing, you can set the clock
Question about Taylor Measuring Tools & Sensors
...temperature signal from the remote sensor. It will continue to flash for 3 minutes or until the signal from the remote sensor is detected. Register the Remote Sensor ·Open the battery compartment at ...
Question about La Crosse Measuring Tools & Sensors
...remote(s) first. (If you need to reset the units, pull the batteries from the indoor temperature sensor and the remotes for 10 minutes before restarting.) With the remotes and indoor sensor 3 to 5 ...
Question about Honeywell Measuring Tools & Sensors
...REMOTE TEMPERATURE AND HUMIDITY; WIND SPEED& WIND DIRECTION OR RAINFALL. WHAT CAN I DO TO FIX THIS? A: If the main unit displays dashes (- - -) in any remote parameter window press and hold the ...
Question about Measuring Tools & Sensors
...temperature signal from the remote sensor. It will continue to flash for 3 minutes or until the signal from the remote sensor is detected. Register the Remote Sensor ·Open the battery compartment at ...
Question about Oregon Scientific Measuring Tools & Sensors
Remote temperature sensor fails after 2 days Remote Temp/RH sensor THGR928N works fine for 2 days after which no signal received on weather station WMR928N. Batteries changed twice. Did long reset of ...
Question about Measuring Tools & Sensors
remote sensor" the unit that is mounted outside? If so, then the thermometer is the unit that is inside the residence? The Station that reveals all readings is placed in doors , the temperature sensor
...in remote sensor. Then put batteries in main unit. Don't touch any of the buttons for 10 minutes or until the outdoor temperature is displayed. If still not displayed after 10 minutes then try
8 questions posted
Usually answered in minutes!
2 Questions
14 Questions
9 Questions