NEC - 42" Commercial Plasma Screen ****(no TV Tuner) Multimedia Projector "projector red green" Questions

Ad

Question about InFocus Office Equipment & Supplies

1 Answer

...projector, i'd say it's a burnt light filter, the red lcd, or the lcd has come unplugged. but since this is a dlp projector, you have either a dmd board issue or a main board issue. either way, it'll ...

Ad

Question about Mitsubishi Office Equipment & Supplies

1 Answer

...Projector won't work Mitsubishi SD110r DLP Projector:: turn on, two greens, then p:red/s:flashing green, then p:red/s:off... no function. ? Your bulb could have blown, Your projector could have ...

Ad

...red and green? When I turn on the projector, the indicator lights turn green. After a few seconds, you hear a click and the status light blinks red and the power light blinks red and green. Reset the ...

Question about Hitachi Office Equipment & Supplies

2 Answers

...lamp LED would blink red and then after a moment the power and lamp LED would stay on solid RED. lamp duration hitachi cprx 78 lcd projector all leds blink in red when i switch on the ...

Question about Sharp Office Equipment & Supplies

1 Answer

...projector on, green power light, blinking green lamp light. After several minutes the lamp light will turn red and the power light blinks green and eventually turns to red as well. i have same issue ...

Question about NEC Office Equipment & Supplies

1 Answer

...red LCD panel inside the projector needs to be physically adjusted.  If you take the projector apart you'll notice that the light source is split into red, green and blue light by passing ...

Question about InFocus Office Equipment & Supplies

1 Answer

...projector stops working and the red light starts blinking and the green light turns off. Then it goes to what I described in the first sentence. sounds like one of the 3 fans inside the projector is ...

Question about InFocus Office Equipment & Supplies

1 Answer

PROJECTOR STARTS FINE,GOES GREEN,COMPONENT VIDEO HOOK UP infocus lp540 goes green after short time,if i disconnect green feed i lose the picture.If i disconnect red or blue,all stays the same. Hi Your

Question about NEC Office Equipment & Supplies

2 Answers

red is still blinking on the 6 cycle. Is the projector receiving a source signal? if not it will power itself down after whatever time you have it set to do so when no signal is present. Just an idea?

Question about ViewSonic Office Equipment & Supplies

1 Answer

red and blue guns to counter the green. Atypically if this is an older projector and has seen a lot of use you will start to experience the degradation of luminescence in the tubes. Resolution: If the

Not finding what you are looking for?
NEC - 42" Commercial Plasma Screen ****(no TV Tuner) Multimedia Projector Logo

34 questions posted

Ask a Question

Usually answered in minutes!

Top NEC Office Equipment & Supplies Experts

Alexander

Level 2 Expert

171 Answers

ExpressFiX
ExpressFiX

Level 2 Expert

691 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a NEC Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...