NEC VT460 Multimedia Projector "lamp blinks 6 times" Questions

my lamp light stays on my status blinks if it's blinking red, how many times? 1 time- lamp cover. 2 times- overheating. 4- fans. 6- lamp. if the lamp led is lit red, replace the lamp.

...lamp cover 2 times red blinks very 2 seconds indicates temperature error. for this let the projector cool off check filters and fans that there is no blockage of air for proper cool down 3 red blinks ...

...6 cycle (0.5 sec On, 0.5 sec Off) is a lamp error! 0.5 sec Off) Lamp fails to light. Wait a full minute and then turn on again. Even though the lamp is not old there may be a defect in the lamp. I ...

...blinks 2x 7 Steps (5&6) happen 4x Thanks for your help, Karl If it is a lamp error try this: When the lamp exceeds 2100 hoursof service, the projector cannot turn on and the manu is not displayed. Do ...

...2 times- temperature error. 4 times- fan error. one or more fans bad. 6 times- lamp fails to light. if lamp is new, ballast is bad. the power and status light blink together i cant operate my ...

status lamp blinking orange 6 times PROJECTOR. NEC VT491 THE STATUS LIGHT IS BLINKING 6 TIMES RED, AND THE POWER LIGHT IS ORANGE

...blinks red 6 times. steady orange means projector in standby mode red light 6 times is a lamp error. either the lamp is old and wont start up or the ballast power pcb is not working. can you hear the ...

I plug it in and the power LED blinks 3 times and the Lamp LED blinks 6 times it stand for the blower Fan error, perhaps you need to replace it.

...lamp error message (6 blinking red status lights) mean the lamp needs to be replaced? or could something else be wrong. According to NEC technical support, if the status light flashes red six times, ...

Hello there, Can you tell me what it means when my status light on my VT676 projector blinks 6 times? lamp error. either the lamp is bad or the ballast is.