...boat engine not working. Unless that has a spin wheel sensor on the transomn, you will find your pito tube intake is plugged. Most common on shallow water boats and weedy lakes. Using a wire and some ...
Question about Mercury Boating
i/o mercruiser 4cyl only overheats in neutral when prop turns it cools down Sounds like the impeller in the lower half of the gearcase is dead. Find a qualified technician.
the engine o.k. Are you sure that your impeller intake is submerged when you are on the boat? If it works with muffs, it should work in the water too, unless you don't have your lower unit deep enough
...boat goes forward,no reverse Should first have some one look at the shift in the engine compartment while some one runs it from the control box. If no movement, would be the cable. Then undo the ...
...boat right away, and I'll explain how.
To get started, first you need to loosen the small pressure relief screw, to left of the larger drain plug screw on the tilt/trim fluid reservoir base. ...
...boat and is it for ski or normal use ? a general prop 23p and better set off 21p ! try a set of doel finns that attach to cavitation plate and this will give you better set off and keep you on the ...
15 questions posted
Usually answered in minutes!
